mouse stuck in corner

A Mouse Stuck In Corner: How It Happened And What To Do

Do you ever just sit and watch your computer cursor move around the screen? It’s like it has a life of its own. You click on something, and suddenly it’s off somewhere else.

But have you ever stopped to think about how that little arrow gets from one side of the screen to the other?

In this blog post, we’re going to do a quick fix for a mouse stuck in corner of your laptop screen. So put on your science hats, because it’s time to learn about mice!

What caused the mouse to become stuck?

the boy worried about his laptop Mouse Stuck In Corner

There are a few possible reasons for this, but the most likely cause is that your touchpad is set to “absolute positioning.”

When this setting is enabled, the cursor will stay in the same position on the screen even if you move your finger around on the touchpad.

The good news is that this problem can usually be easily fixed by going into your touchpad settings and changing the mode to “relative positioning.”

If that doesn’t work, there are a few other troubleshooting steps you can try, including disabling edge gestures or adjusting your palm check settings.

In most cases, one of these solutions should fix the problem and help keep your cursor from getting stuck in the corner of the screen.

Battery Issue

If your laptop is running on battery power, the mouse may move slower than usual or become unresponsive. This is because the battery is not providing enough power to the mouse.


To fix this problem, simply plug your laptop into an outlet and allow it to charge for a few minutes. After the battery has regained some power, the mouse should start working properly again.

If this doesn’t solve the problem, there may be another issue at play. Check to see if the mouse is turned off or if the batteries are low. You may also want to try restarting your computer. 

Mouse Surface Issue 

One possible reason your cursor gets stuck in the corner of your laptop screen is because of the mouse surface. If your mouse surface is too smooth, it can cause the cursor to slip and get stuck.

To fix this, try using a mousepad with a rougher surface. Another possibility is that you have a build-up of dust and dirt on your trackpad. This can cause the cursor to stick or jump around erratically. 


To clean your trackpad, use a lint-free cloth dampened with water or rubbing alcohol. Gently wipe away any dirt or debris. If your cursor continues to get stuck, there may be an issue with your mouse or trackpad settings.

Try calibrating your device or adjusting the sensitivity settings. You may also need to update your mouse or trackpad drivers.

Mouse Drive Is not Updated

If the driver is not up to date, it may not be compatible with the latest version of the operating system, which can cause various issues. In addition, an outdated mouse driver can also cause problems with how the cursor moves on the screen.

Another potential issue that can cause a cursor to get stuck on the corner of a laptop screen is a problem with the mouse itself.

If the mouse is damaged or not working properly, it may not be able to move freely on the screen. It can cause the cursor to get stuck in one spot.

If neither of these issues seems to be the problem, it is possible that there is a problem with the computer itself.

USB Port Is Faulty 

One possible reason for this issue is a problem with your USB port. If your USB port is loose or damaged, it can cause your cursor to get stuck.

In addition, if you have a USB device plugged into your computer that is constantly sending data, it can also cause your cursor to get stuck.


The best way to fix this problem is to unplug all devices from your USB ports and then restart your computer. This will help to reset the ports and hopefully fix the issue. If the problem persists, you may need to replace your USB port.

Trackpad disabled in window 

the boy try to solve the issue of Mouse Stuck In Corner

When the trackpad is disabled in Windows, it can cause the cursor to get stuck in the corner of the screen.

This is because when the trackpad is disabled, Windows doesn’t know how to handle the input from it. As a result, the cursor gets stuck in the corner of the screen. 


All you need to do is enable the trackpad in Windows. Once you do that, the cursor will no longer get stuck in the corner of the screen. So if you’re having this problem, don’t worry.

There’s an easy fix for it. Just enable the trackpad in Windows and you’ll be all set.

Wireless Connection Issue 

One of the most frustrating things that can happen when you’re trying to work on your laptop is a cursor that gets stuck in the corner of the screen.

This often happens when there’s a problem with the wireless connection, causing the cursor to jump around erratically. In some cases, you may be able to fix the issue by simply restarting your laptop or reconnecting to the wireless network.

However, if the problem persists, it’s likely that there’s an issue with the hardware or software on your computer.

Blockage on the optic sensor

The optic sensor is responsible for detecting the position of the cursor on the screen, so when it’s blocked, the cursor can’t move.


To fix this problem, simply clean the surface of your optic sensor with a soft, dry cloth. If that doesn’t work, you may need to replace the optic sensor itself. fortunately, this is a relatively simple and inexpensive repair.

So if you’re experiencing cursor issues, don’t be discouraged – there’s a good chance that you can fix the problem yourself.

How can you fix a Mouse Stuck In Corner?

  1. Restart your computer: This is the first and easiest thing you can try. Sometimes, a simple restart will fix the problem.
  2. Check for hardware issues: If restarting doesn’t work, the next step is to check for hardware issues. Make sure that nothing is blocking the cursor, such as a piece of paper or your finger. Also, check to see if the cursor is stuck in one corner of the screen or if it moves freely around the screen.
  3. Update your drivers: Out-of-date drivers can sometimes cause cursor problems. If you’re having cursor issues, it’s a good idea to update your drivers. You can usually do this through your computer’s manufacturer’s website.
  4. Use a different mouse: If you’re still having cursor issues, try using a different mouse. This will help you determine if the problem is with the mouse or with the computer itself.
  5. Use a different computer: If you have access to another computer, try using it to see if the cursor issue persists. This will help you determine if the problem is with the computer or with the mouse.
  6. Clean your mouse: A dirty mouse can sometimes cause cursor problems. Try cleaning your mouse with a cotton swab dipped in rubbing alcohol.
  7. Clean your screen: A dirty screen can also cause cursor problems. Try cleaning your screen with a soft, dry cloth.
  8. Adjust your settings: There are a few settings that can affect how your cursor behaves. Try adjusting these settings to see if it fixes the problem:
  9. Cursor speed: This setting controls how fast the cursor moves across the screen. Try increasing or decreasing this setting to see if it makes a difference.
  10. Cursor acceleration: This setting controls how much faster the cursor moves when you move the mouse quickly across the screen. Try increasing or decreasing this setting to see if it makes a difference.

What are some preventative measures you can take to stop your mouse from sticking again? 

  1. Check the batteries in your mouse regularly. If they are getting low, replace them.
  2. Clean your mouse regularly with a lint-free cloth.
  3. Avoid using your mouse on surfaces that are dusty or dirty.
  4. If you notice your mouse starting to stick, try using a different type of mouse pad.
  5. Avoid using your mouse in extreme temperatures.
  6. Store your mouse in a cool, dry place when not in use.
  7. Do not drop your mouse or subject it to other forms of physical stress.
  8. Do not expose your mouse to direct sunlight for extended periods of time.
  9. If you are not using your mouse, turn it off to prolong its life span.
  10. Follow the manufacturer’s instructions for care and cleaning.

About The Author

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top