Speedfan doesn't detect my fans

Speedfan doesn’t Detect my Fans! What’s wrong? 5 Quick Fixes

Speedfan is my favorite program for monitoring and controlling the fans on my computer. To maintain a smooth and cool system, I depend on it.

But something strange happened today – Speedfan doesn’t detect my fans! I began investigating because I was concerned that they might have an issue.

After a little digging, I found potential fixes for when Speedfan doesn’t detect your fans:

  1. Make sure your fans are plugged in correctly.
  2. Make sure your motherboard supports fan control.
  3. Update your BIOS and chipset drivers.
  4. Make sure Speedfan is installed properly.
  5. Check your power management settings.
  6. Try another fan controller software program.
  7. Check the cabling to your fans.
  8. Replace your motherboard if it’s old or damaged.
  9. Test your fans with a multimeter.

What is SpeedFan?

what to do when Speedfan doesn't detect my fans

The computer program SpeedFan tracks and discloses fan speeds, temperatures, voltages, and other computer-related parameters. It can be used to monitor and optimize the performance of a computer’s cooling system.

Speedfan can also be used to control fans’ speed, ensuring they are running at the correct speed for the temperature of the cooling components. 

How do you use SpeedFan?

Speedfan uses Speedfan to monitor the temperatures of your computer’s components and ensure they are running at optimal levels. Prior to utilizing Speedfan, it is necessary to download and install the software onto your computer.

After installing Speedfan, you may open and customize the program per your requirements. If you want to maintain your computer’s optimal performance, Speedfan is an invaluable tool.

What are the Causes of SpeedFan doesn’t detect fans?

check Speedfan software

Hardware Issues

One of the primary causes of SpeedFan not detecting fans is hardware issues. If the fan controller on your motherboard is faulty, SpeedFan may not be able to detect any fans connected to it.

Additionally, if the sensors on your fans are damaged, SpeedFan may also have difficulty detecting them.

Driver Issues

Another common cause of SpeedFan not detecting fans is driver issues. If the drivers for your fans need to be updated or corrected, SpeedFan may not be able to communicate with them properly.

Additionally, if you have multiple fan controllers installed on your system, one may need to be consistent with SpeedFan, causing it not to detect fans.

Incorrect Settings

If you have incorrectly configured the settings in SpeedFan, it is possible that it needs to be detecting your fans because it is looking for them in the wrong place.

Suppose you have configured SpeedFan to search for only 3-pin fans and have 4-pin fans linked to your computer. In that case, it won’t be able to identify them.

Damaged Fans

Another possibility is that your fans are damaged and no longer working properly. If your fans are making strange noises or are failing to spin up when they should, they may be damaged and need to be replaced.

Wrong Fan Type

You may also need a different type of fan connected to your system. If a 4-pin fan is connected to a 3-pin header, SpeedFan cannot detect it, for example. Make sure that all of the fans connected to your system are compatible with the headers on your motherboard.

Interference from Other Devices

If you have other devices connected to your system emitting electromagnetic interference (EMI), it is possible that they are interfering with SpeedFan and preventing it from detecting your fans.

To fix this issue, try moving any devices emitting EMI away from your computer or disconnecting them from power altogether.

Poor Contact Between Fan and Header

If there is poor contact between the pins on your fan and the header on your motherboard, SpeedFan may need help to detect the fan properly. Make sure that there is no dirt or debris on the pins of both the fan and the header to resolve this problem.

Additionally, check to ensure that the pins are properly aligned and inserted into the header before attempting to use SpeedFan again.

What happens when SpeedFan doesn’t detect my fans?

In most cases, SpeedFan will automatically detect fans connected to your computer. However, there are times when SpeedFan may need help to detect a fan. It can occur if the fan is not properly connected, is not working, or has a problem with the motherboard.

SpeedFan will typically display a warning message if it does not detect a fan. In some cases, SpeedFan may also be able to change the fan speed manually.

Problem: Speedfan does not detect fans in some computers.

Some users have reported that Speedfan does not detect fans on their computers. Several explanations exist for this problem.

  • It could be necessary to insert the fan connectors into the motherboard correctly. Unplugging and replugging the connectors should fix the problem if this is the case. 
  • Second, Speedfan may not be compatible with some motherboards. In this case, updating the BIOS or using a different fan control program may be necessary. 
  • Finally, there is also an issue with the sensor Speedfan uses to detect fan speed. Resetting the sensor may be the solution if this is true. 
  • Speedfan is a helpful program for monitoring fan speed, but its compatibility with some computers can be an issue.

Solutions: Try different fan speed settings, update drivers, or uninstall SpeedFan

try different Speedfan setting

Check if your CPU fan is connected properly 

The first thing you should do if Speedfan doesn’t detect your CPU fan is to check if the fan is properly connected to the motherboard. If it’s not, you’ll need to connect it before proceeding.

Check if Speedfan is configured properly 

Another thing you can do is to check if Speedfan is configured properly. To do this, open Speedfan and go to the “Configure” tab. Under the “Advanced” section, ensure that the “Enable ACPI table decoding” option is checked.

Update your BIOS 

If Speedfan isn’t detecting your CPU fan, you should update your BIOS. BIOS stands for Basic Input/Output System, software that helps your operating system communicate with your hardware.

To update your BIOS, download the latest version to your motherboard manufacturer’s website.

Try a different fan control software 

If none of the above solutions works, consider using a different fan control software. There are a few different options available, so feel free to experiment until you find one that works.

Check if there’s a problem with your CPU fan 

If all else fails, then there may be a problem with your CPU fan itself. In this case, you’ll need to replace the fan or contact customer support for further assistance.

How do I add a fan to SpeedFan?

SpeedFan is a great way to monitor your computer’s temperature and ensure it’s running cool. But what do you do if you want to add an extra fan? It’s easy. Just open up SpeedFan and click on the “Configure” button. You’ll see a list of all the fans on your computer.

Click the “Add” button to add a new fan and provide the necessary information. That’s all there is to it! Adding an extra fan is a great way to improve your computer’s cooling performance and ensure it stays cool.

What do I do if my CPU fan is not detected?

If you’re troubleshooting your PC and you’ve determined that your CPU fan isn’t working, there are a few things you can do to try and fix the problem:

  1. Ensure that the fan is plugged into the motherboard’s CPU header.
  2. Check to see if any debris or dust blocks the fan. If the fan is clear, try booting up your PC and see if the fan starts spinning. If it doesn’t, you may need to replace the fan.
  3. If your CPU is overheating, you may need to add additional cooling fans or replace the thermal paste on your CPU.

By following these steps, you should be able to get your CPU fan up and running again.

About The Author

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top